How To Service LCD Acer AL1517 Power Flame But Dark Screen

0 572
advertisement

lcd acer How To Service LCD Acer AL1517 Power Flame But Dark ScreenHow To Service LCD Acer AL1517 Power Flame But Dark Screen

Acer AL1517 LCD Service How To Power Flame But Dark Screen

Finally posting again. this discussion is about the Acer AL1517 LCD Service How to Power Flame But Dark Screen. This case is very common, not only in this brand LCD, but other brands as the case together. Want to know how its service ...? How To Service LCD Acer AL1517 Power Flame But Dark Screen

Indications of Damage:
When the LCD is turned on, power LED flash, and sometimes blinking flames, but display no image at all, aka the dark.

Acer AL1517 LCD Service How To Power Flame But Dark Screen:
1. Open to the five screws on the back LCD. A screw which is located in the center of the bottom, cover the same ketutup feet. Songkel new leg cover screws visible.

2. Power Search module Supply, because the problem is here.finally posting again. this discussion is about the Acer AL1517 LCD Service How to Power Flame But Dark Screen. This case is very common, not only in this brand LCD, but other brands as the case together. Want to know how its service ...?

Indications of Damage:
When the LCD is turned on, power LED flash, and sometimes blinking flames, but display no image at all, aka the dark.

Acer AL1517 LCD Service How To Power Flame But Dark Screen:
1. Open to the five screws on the back LCD. A screw which is located in the center of the bottom, cover the same closed feet. Songkel new leg cover screws visible.

2. Power Search module Supply, because the problem is here.

 

 How To Service LCD Acer AL1517 Power Flame But Dark Screen

3. Elco which checks whether there is swell, if there is immediate change. If no suitable reply elco who are looking for a larger size, for example can be replaced with 1000uF/16v 870uF/10v, even better. How To Service LCD Acer AL1517 Power Flame But Dark Screen

4. Elco swell which causes a voltage drop which was so below 12v, 5v so dn which was well below it. And this is the cause of LCD INVERTER not lift her (if monitors CRT = Flyback), because the working voltage drop.

 How To Service LCD Acer AL1517 Power Flame But Dark Screen

5. when it can be replaced immediately in the try ...

6. If you still do not flame, check the fuse / fuse after the voltage of the transformer 12v Power supply, usually broken.

 How To Service LCD Acer AL1517 Power Flame But Dark Screen

7. OK, Good luck .... How To Service LCD Acer AL1517 Power Flame But Dark Screen

Good luck .....

=============================

source: ekohasan

edited by: twinqu.com

advertisement
Category: Business GalleryTags: