Fan Service a way that is not rotating and Buzzing
After getting the fan service last week, my friend tried to share knowledge of this blog. If you find a fan that guns could be going around and even just buzz / vibrate only. Guns hurry throw it away. Because you still may be able to fix itself. Fan Service a way that is not rotating and Buzzing
Actually, the damage was caused due to a worn bearing. Thus resulting in the fan touched the liner as kern.
Fan Service a way that is not rotating and Buzzing:
1. Disassemble the fan frame and its propeller wake. And open the bolts that tie the roll frame / spool fan slowly and be careful not to cut the connecting wires to the coils, because the consequences could be fatal if you can not find / reconnect the cable broke.
2. Remove the bearing of his house, and try to see whether there has been the ausan on the bearing liner if true, means the bearing should be replaced. These bearings are often found on the market and the price is relatively cheap. Fan Service a way that is not rotating and Buzzing
3. Once the bearing is replaced, before we close the back (to assemble the fan) would not hurt if we clean all the dirt, how to use paint thinner or gasoline but do not forget to be dried before it is assembled from benzene or thinner. The main thing is clean as a fan with a clean cloth, then give a little baby oil or paslin (not too much and just asnya only) as the most important surface in direct contact with the ball bearing / bearings lubricated. Fan Service a way that is not rotating and Buzzing
4. Once everything is clean and assembled, ready to try the fan .. result huftttttttt cool boss ..
Good luck good luck